Versatile epoxy system is perfect for Direct-To-Metal (DTM), direct-to-tightly adhered rust, concrete floors, pools and more. A high solids, next generation polyamine converted epoxy.
 

• Minimizes prep - Apply Direct-To-Metal and tightly adhered rust


• Self-priming, single coat provides service life equal to multiple coats of competitive epoxy


• Maximum corrosion protection


• Superior long-term solvent, chemical and abrasion resistence


• Outstanding impact resistence


• Convenient 1:1 mixing ratio of base and activator


• Versatile base formula - Works with all activators (Standard, Immersion, Low Temp or Fast Cure) at VOC < 340 g/l or < 250 g/l


• USDA acceptable* and Agriculture Canada** approved


 

STANDARD ACTIVATOR

• For air and surface temperature of 50 - 100 F (10-38 C)

 

IMMERSION ACTIVATOR

• For fresh or salt water immersion of steel or concrete
  where water temperature do not exceed 125 F (52 C)


• Great for use in floor coating applications


• Produces slightly lower gloss than standard activator


• Not for use in potable water tanks

 

LOW TEMPERATURE ACTIVATOR
 

• For air and surface temperatures of 40 - 60 F (5 - 15 C)

 

FAST CURE ACTIVATOR
 

• Faster cure to minimize downtime


• Recoat in 4 hors at 70 F (21 C) and 50% RH


• For air and surface temperature of 50-100 F (10-38 C)


• Produces slightly lower gloss than standard activator